ChatGPT for architects: what it is good for, where it fails with regulations and how to check it
ChatGPT and the other general assistants draft, summarise and explain well. They are not a source of regulations: use them for the former and never accept a requirement without opening the official text.

In this article
The short version
ChatGPT and the other general-purpose assistants are good at drafting, summarising, explaining and organising. They are unreliable when asked for a specific regulatory requirement: the article, the figure and the condition under which it applies. In an architecture practice, use them for the former and never accept a requirement without opening the official text.
The working rule is simple: every figure that ends up in an application needs its regulation, its section and its version. Someone in the practice must have read them. A chat answer, however good it sounds, is not a justification.
What it is good for
There is plenty of practice work where a general assistant genuinely saves time, because it depends on writing well and organising rather than on an exact figure:
| Task | What to ask | What you check |
|---|---|---|
| Drafting | A letter to the client, a reply to a neighbour, the text of a fee proposal, a project description for the website. | The tone and that it promises nothing you would not do. |
| Summarising | The main points of a long bylaw or a technical report you already have in front of you. | That no condition is missing: summaries swallow the “unless”. |
| Explaining | A concept in plain language for a client: what a self-declaration is, what a health and safety coordinator does. | That the explanation still holds in your region. |
| Organising | Turning site-visit notes into a task list or a meeting into minutes. | Dates, names and commitments. |
| Editing | Removing repetition from the descriptive report, unifying terms, fixing typos. | That it does not change the technical meaning of a sentence. |
In all of these tasks a mistake is visible and cheap: you read it and fix it. With regulations, that is not the case.
Where it fails with regulations
It quotes from memory
A general model need not consult the official gazette when it answers: it often reproduces what it learnt. It can give a section that does not exist, mix two basic documents or cite an earlier version. Spain’s building code has been amended several times since 2006. The version that counts is the consolidated one published in the BOE, not the one the model remembers.
It gives the figure without the condition
Almost every requirement has a condition of application. An example: the minimum height of a balustrade under DB-SUA 1, section 3.2.1, is 0.90 m where the drop it protects does not exceed 6 m. Otherwise it is 1.10 m, with an exception for narrow stair wells. An answer giving only “0.90 m” or only “1.10 m” is not entirely false but it is no use: it lacks the condition that decides which one applies to your project.
It does not know your town
The local plan, the bylaws, the heritage catalogues and each council’s reading of them change from one town to the next and are rarely well represented in what a general model learnt. For a change of use or works on a listed building, that is half the answer.
It does not see the whole project
Paste a paragraph and it answers about the paragraph. The inconsistencies that matter sit between documents: the area in the report’s schedule that does not match the drawings, the budget that differs from the one in the waste management study, an address from another project left in an annex.
It answers even when data is missing
A good professional asks before answering: what use, what kind of works, which town, which stage. A general assistant tends to answer anyway, assuming what it does not know. The answer sounds confident and is built on an assumption you cannot see.
How to ask
If you are going to use it for a technical question, the way you ask changes the quality of the answer a great deal. What works:
- Give the full context. Town, region, current and intended use, kind of works (new build, refurbishment, change of use, extension) and project stage.
- Ask for the source. Regulation, section and version of each figure. Also ask for a clear line between what the rule says and what is interpretation.
- Allow it not to know. “If you are not sure of a section, say so instead of guessing.”
- Ask for the conditions, not just the value. “What decides whether one figure or the other applies?”
- Paste the official text when you have it. Asking it to reason over the section you provide is far more reliable than asking it to remember.
An example of a request that tends to work: “Change of use from shop to dwelling on the ground floor, in Andalusia, existing residential building. Here is section 3.2.1 of DB-SUA 1. The courtyard has a 2.80 m drop. Tell me which balustrade height applies to it and which project data you would need to check.”
How to check the answer in five minutes
- Open the consolidated text of the regulation in the BOE or, for the building code, on codigotecnico.org.
- Find the section cited and check that it exists and says what the answer claims.
- Look at the date of the version in force and whether the works fall under transitional provisions.
- Read the conditions of application: use, scope, kind of intervention and exceptions.
- Check whether the local plan or bylaw tightens or qualifies the requirement.
- Write in the report the regulation, the section and the project figure that complies with it.
If the result is going to be justified in the report, this last step is the one that matters. We explain how to organise it in what a project report must contain.
Your client’s data
A land registry extract, a deed, an identity document or the contract with the client contain personal data. The practice is accountable for how they are processed under the General Data Protection Regulation. Before pasting a document into a general-purpose tool, check its terms: where the data is kept, whether it is used to train models and whether you can switch that off. If in doubt, remove names, identity numbers and personal addresses before using it.
When a specialised tool makes sense
The line is clear: when the question is about your project rather than about regulations in general. Then what is needed is to read every document, cross-check them, apply the rules of the place in their current text and say where each figure comes from.
That is what Archelo does. It checks the report, the drawings in PDF and DXF and the estimate against the building code section by section and the rules of the place. It flags what does not match between documents and says what remains pending when a figure is missing. Its answers rest on the regulations and the project’s documents, with the reference for each figure. We explain it on AI for architects and, more generally, in how to use AI in an architecture practice.
Frequently asked questions
Is ChatGPT reliable for checking Spain’s building code?
To understand a concept or a basic document, it helps. For a specific requirement it is not enough: it can cite a section that does not exist, an earlier version or a figure without its condition of application. Always check it in the consolidated BOE text or on codigotecnico.org.
Can I use ChatGPT to write a project report?
For the wording and style of the descriptive report, yes. The regulatory justification, not without checking it section by section. Every figure must carry its regulation and the project figure that meets it.
Does ChatGPT know which planning rules apply in my town?
Rarely with certainty. Local plans, bylaws and heritage catalogues are municipal and change. A general assistant need not consult the version in force. Start from the council’s own plan and bylaw.
What is the difference between ChatGPT and Archelo?
ChatGPT is a general assistant. Archelo is built for a practice’s technical work. It checks the project’s documents against the official text of the rules of the place and cross-checks report, drawings and estimate. It says where each figure comes from and what remains pending.
















